Description
SP Tuning Stainless Steel Clutch Line for McLeod Hydraulic Throwout Bearing | Gen 3/4 Viper
Here is the SP Tuning Stainless Steel Clutch fluid line designed to work with the McLeod Racing Hydraulic Throwout Bearing. This line is essential to making the McLeod throwout bearing fully functional in your Gen 3/4 Dodge Viper. The McLeod throwout bearing uses a different line connection than that of the Dodge, and it must be changed out on the body side of the vehicle. The SP Tuning fluid line comes wrapped in heat resistant DEI sheathing for proper protection where it is routed near the exhaust system.
Note: Modification to your clutch master cylinder is necessary. You will need to carefully drill out the orifice of your master cylinder with a 1/4" drill bit. Then, lightly tap the new adapter fitting into the master cylinder and secure with the new roll pin.
