Description
This is the AGP Oil Feed Line Kit for SRT-4 Big Turbo upgrades. The kit comes with the proper fitting that screws into the oil supply on the engine block, a 23" long -4AN teflon lined steel braided hose, and the oil feed fitting for the turbo. One side of the hose has a 90 degree crimped end, and the other has a straight crimped end to keep the line away from the hot parts in the engine bay. The line is sleeved with high temperature heat wrap to prevent overheating of the oil, or damaging the inside lining of the hose itself. AGP has designed this line specifically for the Neon SRT-4 AGP Big Turbo Kit. This kit may work with other manufacturer's kits, but we can not confirm.
Specify oil feed inlet fitting for the turbo.
- T3 bearing housings - 1/8" NPT
- T4 / S200/S300 bearing housings - 1/4" NPT
- Garrett GTBB bearing housings - 7/16-24 Iverted Flare
- Garrett/AGP Twin Ball Bearing housings - 7/16-24 Inverted Flare Restricted Brass Fitting
- T3 bearing housings that require oil restriction due to engine condition or excessive oil pressure - 1/8" NPT with a .065" Restrictor
We also offer the Oil Feed Flange Kit as an option here. If your turbo oil feed has two threaded outer holes and you can't figure out what your feed size is, choose this "I DON'T KNOW" option and you'll be all set.
