Description
Matching the stock turbo, the CP-E Focus ST Catted Downpipe includes a laser cut turbo flange. This design fits flawlessly with stock Focus turbo flange. Premium American made "bright annealed" 304 stainless steel is mandrel bent throughout for less turbulent exhaust flow. Include are three O2 bungs to accommodate the two stock O2 sensors. Additionally, they give the ability to easily add a wideband sensor.
Focus ST Catted Downpipe Features
- Laser cut turbo flange
- Extra O2 bung for adding a wideband sensor
- Laser cut stainless steel bracket
- Mate to stock exhaust or 3.00" exhaust
- Industry-leading stainless steel flex joint
- Metallic honeycomb high flow cat (optional)
- Full 3.00" mandrel bent 304 stainless steel
- Titan finish to strength material, and give clean uniform finish
- Included Smart O2 Simulator with Off-Road Downpipe
- More than 5% gains in upper RPMs
Also helping to accommodate the stock mounting, cp-e® has designed this downpipe to use the stock downpipe support mount by welding a laser cut stainless steel bracket onto each downpipe. This bracket mounts the downpipe securely and provides the extra support needed to make it last a lifetime. cp-e® has taken the extra step to supply a custom laser cut gasket with the downpipe. Specifically, this mates to the stock turbo completely leak-free.
Focus ST Catted Downpipe Construction
On the outlet end of the downpipe, CP-E has created a slip joint that allows the installer to mate it to the stock exhaust or a full 3.00" exhaust. This adapter allows the customer to buy a true full 3.00" downpipe instead of being limited to a downpipe that needs to neck down at the flange. This gives the smoothest transition to either exhaust size and gives the option of "upgrading down the road". Now you can have a full 3.00" downpipe without sacrificing on what exhaust you have.
Finally, the Focus ST Catted Downpipe features the all-new finish from cp-e®. This satin finish not only gives a uniform clean finish throughout but also strengthens the stainless steel and the welds for added reliability. Made in the U.S.A. and backed by a lifetime warranty, all your bases are covered.
Focus Downpipe ‚ The Perfect ST DP
Bear in mind, without this adapter the 3.00" downpipe will be larger than the stock exhaust flange. Consequently allowing exhaust gases to escape past the gasket. Thanks to this adapter, the customer is buying a true full 3.00" downpipe. Rather than having the limitation of a downpipe that necks down at the flange. Along with the gasket adapter, the downpipe comes with the necessary hardware needed. Additionally, this downpipe will mount to a stock exhaust system as well as an aftermarket exhaust system.
Finally, the downpipe features the all-new finish from cp-e®. This satin finish not only gives a uniform clean finish throughout but also strengthens the stainless steel and the welds for added reliability. Made in the U.S.A. and backed by a lifetime warranty, all your bases are covered.
