Description
Has your factory pump hit its limit, and you still need more pump capacity? Do you want the capability of more power without the worry of a multi-pump controller failing, a custom length belt breaking or a second pump to worry about? For applications up to 800+HP, our 10mm Stroker CP3 pumps are the best option to take your build to the next level while incorporating all the increased reliability features of our Sportsman pump.
Pioneering a reliable modified CP3 pump did not come easy. Thousands of hours of research and development have gone into making their pumps what they are today. Exergy found the limits on a durability test bench, not on customers' vehicles. After the initial R&D was complete, each series of pumps was subject to one final test in which they ran the pump at 4500 rpms and a pressure that far exceeded what the pumps would see in the field for 40 hours. A final inspection was done after this test to ensure no parts had significant wear. In production, each and every pump is tested throughout the entire operating range of the pump up to 4500 rpm and 29,000 psi to ensure 100% proper function before being installed into a vehicle.
The Exergy 10mm Stroker pumps have been verified by third party testing to have a "Reasonable Bases" of being compliant with Federal Emission requirements.
Let Exergy give you peace of mind with your fuel system purchase!
Note: A lift pump capable of 150 GPH @ 15 psi per pump is required to achieve maximum performance. Also, this is a 6.7 based CP3 pump. Consequently, the fuel supply line will need to be modified as the inlet port is in a different location on the pump.
This pump can be used as a replacement for Bosch part numbers 0 986 437 304, 0 445 020 147, 0 445 020 039, and 0 445 020 011, as well as Mopar part numbers R5143425AA, 50104877AA, and R5191780AD.
NO CORE CHARGE or CORE RETURNED NEEDED!!!
