Description
Description
- Billet cam sensor housing
- Billet cover + sensor shield
- 18 degrees of + / – adjustability
- (2) O-Rings for the front and back on the housing
- (2) Additional O-Rings as a spare set
- SS hardware for the housing, cover, ground wire, and sensor.
- Additional options are a non sensor shield cover.
Here are a few benefits with using this setup:
- Adjustable housing gives you the ability to re phase the sensor with the crank sensor for those who have resurfaced the block and head.
- Pulls the sensor away from the turbo manifold heat that is known to damage the sensor from being to hot. This also helps prolong the life of the sensor
- Now prevents you from breaking the plug or end of the sensor off from working on the car and accidentally hitting it
- Puts less stress on the wires by not being bent 180 degrees.
- O-Ringed front and back housing. No more RTV. No more gaskets. No more oil leaking
- And lastly because its awesome.
NOTE. Evo 4/5/6 will require the Evo 7/8/9 T stat housing to allow full adjustment swing and cover shield clearance.
